this drawing is the property of raf. it contains confidential, proprietary information that is raf property. do not disclose to or duplicate for others except as authorized by raf. tolerances all dimensions are inches (unless otherwise specified) metallic lengths : 6 inches 0.010 diameters: 0.005 non-metallic length: 0.010 diameters: 0.010 internal threads: minimum thread depth scale sheet 1 of 1 rev date drn chk change sj t drawn 9/32 [7.14] 5/8 [15.88] 1-9/32 1/32 [32.54 0.79 ] 5/16-5/8 [7.94-15.88] blind tap depth (x2) 2 1/32 [50.80 0.79 ] oval internal thread handle 8368-1032-SS 1.13 95 silvermine rd.,seymour ct 06483 tel: 203-888-2133,fax: 203-888-9860 12/20/16 component handles notes: 1. material : aluminum (qq-a-225/8b, qq-a-200/9d) (rohs comp.) 2. finish : nickel qq-n-290 class 1 grade g 3. % of thread for tapped holes : form tap - 55 | cut tap - 65 4: threads are supplied cut or rolled at raf's option unless noted on order. 5. threads are to commercial 2a and 2b standards per handbook h-28 (part 1) 6. all drawing dimensions are in inches unless noted otherwise 7. asme y14.5m - 2009 8. unless otherwise specified; edge breaks, radii or countersinks 0.005-0.015 8-32 unc (typical) r 0.313 [7.94]
|
